DESIGN AND FABRICATION OF GROUNDNUT SHELLING MACHINE


DESIGN AND FABRICATION OF GROUNDNUT SHELLING MACHINE  

ABSTRACT

Groundnut shelling machine was designed and fabricated at the department of Mechanical Engineering, institute of Technology, Kwara State Polytechnic Ilorin aimed at increasing shelling/decorticating efficiency and eliminating drudgery associated with the traditional method of -shelling groundnut and other developed method such as pedal operated methods. The machine is powered by a 1.5 horse power motor at a speed of 1440 revolution per minute. Performance investigation carried out show a good performance of the machine with decorticating efficiency, undecorticating efficiency, machine damage efficiency, cleaning efficiency and output capacity of 92%, 7.5°k, 3%, 85% and 120kg/hour respectively.

TABLE OF CONTENT

Title page i

Approval Page ii

Dedication iii

Acknowledgement iv

Abstract v

Table of content vi

List of Figures  vii

Nomenclature viii

CHAPTER ONE 

1.1 Introduction 1

1.2 Aim and Objectives of the Project 3

1.3 Justification of the  Project 3

1.4Working Principle5 CHAPTER TWO

2.0 Literature Review 6

2.1 Methodology 7

CHAPTER THREE 

3.1 Selection of materials Used 8

3.2 Beater Assembly 13

3.3 The Sieve 14

CHAPTER FOUR

4.0 Design Analysis 15

4.1 First Stage Design Consideration in New Machine            15

4.2 What is design           15

4.3 Why do we Design          18

CHAPTER FIVE

5.0 Design Calculator 20

5.1 Decorticating Unit Housing 20

5.2 Fan Blades 20

5.3 Pulleys 20

5.4 Design Calculations 20

5.5 Speed Ratio Analysis 21

5.6 Moment of inertia 21

5.7 Calculation of torque 22

5.8 Calculation of machine Drive power 2 3

5.9 Tension in the Belt 23

CHAPTER SIX

6.0 Advantage 28

6.1 Disadvantage            28

6.2 Application            28

6.3 Maintenance 28 

6.4 Autonomous Maintenance Activity            29

6.5 Cleaning            29

6.6 Cleaning is Inspection            30

6.7 Cleaning Process 30

6.8 Visual AIDS to Maintain Correct Equipment Condition            30

6.9 Adjust and Minor Repair            31

6.9.1 Adjust and Minor Sequences 31

6.9.2 The Path to perfect Safety 32

6.9.3 Chronic Defects 32

6.9.4 Equipment Improvement 32

6.9.5 Equipment Responsibilities of Operator 33

6.9.6 Precautions and safety measures 33

6.9.7 Precaution 34

6.9.8 Safety Measures 34

6.9.9 Recommendation for school                         34

6.9.10 Conclusion           34

          Reference 36 

CHAPTER ONE

1.1 INTRODUCTION

Groundnut is grown mainly in the Northern parts and middle belt of Nigeria. Today we see photographs of pyramids of groundnut taken during the colonial era which has since then disappeared. Some schools of thought attributed this to quite a number of local industries now utilizing them which before were stored as pyramid waiting for export. The Government of Nigeria through its Agricultural programme has seen the need to explore to grow crops including groundnut for many reasons including:

i. Meeting local consumption needs

ii. Stop importation and conserve fund for other uses:

iii. Meeting local industrial uses 

iv. Earn foreign exchange through export

v. Create huge employment of the citizen

Groundnut of botanical name Arachis hypogea belongs to the family leguminous. It is a herbaceous plant of which there are two major varieties, bunch and runner. Bunch varieties, common in the United States, grow 30-46cm high and do not spread. Runner varieties, the most common in West African, are shorter and spreads along the ground for 30-60cm. it is grown as an annual crop on about 19 million hectares in tropical regions and warmer areas of temperature regions of the world, principally for its edible oil and protein rich kernel or seeds, borne in pods, which develops and mature below the soil surface. (Asiodu, 1989)

Large cultivation of any agricultural product will also be faced with post harvest challenges. Generally, post harvest handling involves some transforming of the harvested products into materials stored and preserved for further processing. In the case of groundnut that is harvested as pods, it is dried and then processed by shelling/decorticating it to kernels for all users.

Traditional methods of shelling groundnut are done using hand with finger tips or using mortar and pestle. Whichever method is used, it is associated with drudgery, pains at the joints and blistering of fingers. The quality of kernels is mainly determined by the percentage of whole undamaged kernel.

The factor among others has mad the decortications of groundnut an important process that must be developed to enhance value addition and also remove human efforts and also remove human efforts and associated difficulties when using traditional method of shelling such as losses labour intensity, time consuming and low output capacity.

1.2 AIM AND OBJECTIVES OF THE PROJECT

In our country due to heavy cultivation of groundnut there is a need of shelling the ground nuts and obtaining the peanuts in safe, fast and economic form. The agricultural industries in our country heavy machines to do the same but the farmers in rural areas and in small industries its necessary to have a economical and high efficiency machine which can easy bark the groundnut shell, to get this done many machines are use some are universal nutsheler, rubbertyersheller etc.

Hence we, the group of our class found the need of designing and manufacturing such a system will make the peanuts  easily come out from its shell and the peanuts too not get broken while the shelling is taking place.

1.3 JUSTIFICATION OF THE PROJECT

Our design improves on the prior art because it is inexpensive, small scale, and does not need outside help to build. The materials and tools are readily available and do not require communication with external parties to be built.

Big commercial systems are simply too expensive of our target market. Even the hand cranked machines cost upwards from £130.  

The Malian peanut Sheller is also a good low cost alternative but it requires the builder to have molds to make the concrete components. If the builder has access to fiberglass materials to make molds out of, it is easy for him to build the device. If he does not have access and buy the molds at through the United States, which may be very expensive. We aim to eliminate the need for molds and the need for outside parties. Our machine requires no foreign assistance at all. It can be built using local materials by the local craftsmen. There is no need for builders to communicate and interact with foreign parties.

Our approach to solving the peanut shelling problem is to use the concept of the rubber tire design but make it affordable and easy to build with locally accessible materials. The machine itself is very easy to build, and requires few skills besides basic carpentry. Our concept does away with costs and complexity of is simple; extruded steel and other common components are easy to find. The concept is simple and the design is modular. So it can be expanded of higher through put is desired. Locally accessible materials may differ in different regions. So our design can be adapted to use different materials. The second component of our system is a device that separates the shelled kernels from the shells. Prior designs for separation equipment use forced air to carry the shells away from the kernels. Since forced air requires complex fan units and extra power. We designed a separation machine that does not depend on air currents. Our design uses the gravity  property of the kernels to separate them from the husks. The round kernels to separate to the shell fragments. Which are flat and may have fibers sticking out at the broken edges. Our separator places the combined kernels and shells onto an inclined plane where the round kernels roll down the plane, and the shell fragments stick on the sloped.

1.4 WORKING PRINCIPLE

The peanut sheller is made of a used tire mounted in a metal housing with a concave wire screen bottom. As the wheel is rotated the nuts enter the space between the tire and the screen. In operation, groundnut in the hopper is fed into the clearance between the rubber tire and the concave while the rubber tire is turning. The groundnut is then shelled by rubbing action between the rubber tire and the wire mesh. After the groundnut has been shelled, the kernel and the shell fall through the wire mash into a collecting pan separation of the shell from the kernel has to be done separately.

.


TYPE IN YOUR TOPIC AND CLICK SEARCH.






RESEARCHWAP.COM

Researchwap.com is an online repository for free project topics and research materials, articles and custom writing of research works. We’re an online resource centre that provides a vast database for students to access numerous research project topics and materials. Researchwap.com guides and assist Postgraduate, Undergraduate and Final Year Students with well researched and quality project topics, topic ideas, research guides and project materials. We’re reliable and trustworthy, and we really understand what is called “time factor”, that is why we’ve simplified the process so that students can get their research projects ready on time. Our platform provides more educational services, such as hiring a writer, research analysis, and software for computer science research and we also seriously adhere to a timely delivery.

TESTIMONIES FROM OUR CLIENTS


Please feel free to carefully review some written and captured responses from our satisfied clients.

  • "Exceptionally outstanding. Highly recommend for all who wish to have effective and excellent project defence. Easily Accessable, Affordable, Effective and effective."

    Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.
  • "I saw this website on facebook page and I did not even bother since I was in a hurry to complete my project. But I am totally amazed that when I visited the website and saw the topic I was looking for and I decided to give a try and now I have received it within an hour after ordering the material. Am grateful guys!"

    Hilary Yusuf, United States International University Africa, Nairobi, Kenya.
  • "Researchwap.com is a website I recommend to all student and researchers within and outside the country. The web owners are doing great job and I appreciate them for that. Once again, thank you very much "researchwap.com" and God bless you and your business! ."

    Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.
  • "I love what you guys are doing, your material guided me well through my research. Thank you for helping me achieve academic success."

    Sampson, University of Nigeria, Nsukka.
  • "researchwap.com is God-sent! I got good grades in my seminar and project with the help of your service, thank you soooooo much."

    Cynthia, Akwa Ibom State University .
  • "Great User Experience, Nice flows and Superb functionalities.The app is indeed a great tech innovation for greasing the wheels of final year, research and other pedagogical related project works. A trial would definitely convince you."

    Lamilare Valentine, Kwame Nkrumah University, Kumasi, Ghana.
  • "Sorry, it was in my spam folder all along, I should have looked it up properly first. Please keep up the good work, your team is quite commited. Am grateful...I will certainly refer my friends too."

    Elizabeth, Obafemi Awolowo University
  • "Am happy the defense went well, thanks to your articles. I may not be able to express how grateful I am for all your assistance, but on my honour, I owe you guys a good number of referrals. Thank you once again."

    Ali Olanrewaju, Lagos State University.
  • "My Dear Researchwap, initially I never believed one can actually do honest business transactions with Nigerians online until i stumbled into your website. You have broken a new legacy of record as far as am concerned. Keep up the good work!"

    Willie Ekereobong, University of Port Harcourt.
  • "WOW, SO IT'S TRUE??!! I can't believe I got this quality work for just 3k...I thought it was scam ooo. I wouldn't mind if it goes for over 5k, its worth it. Thank you!"

    Theressa, Igbinedion University.
  • "I did not see my project topic on your website so I decided to call your customer care number, the attention I got was epic! I got help from the beginning to the end of my project in just 3 days, they even taught me how to defend my project and I got a 'B' at the end. Thank you so much researchwap.com, infact, I owe my graduating well today to you guys...."

    Joseph, Abia state Polytechnic.
  • "My friend told me about ResearchWap website, I doubted her until I saw her receive her full project in less than 15 miniutes, I tried mine too and got it same, right now, am telling everyone in my school about researchwap.com, no one has to suffer any more writing their project. Thank you for making life easy for me and my fellow students... Keep up the good work"

    Christiana, Landmark University .
  • "I wish I knew you guys when I wrote my first degree project, it took so much time and effort then. Now, with just a click of a button, I got my complete project in less than 15 minutes. You guys are too amazing!."

    Musa, Federal University of Technology Minna
  • "I was scared at first when I saw your website but I decided to risk my last 3k and surprisingly I got my complete project in my email box instantly. This is so nice!!!."

    Ali Obafemi, Ibrahim Badamasi Babangida University, Niger State.
  • To contribute to our success story, send us a feedback or please kindly call 2348037664978.
    Then your comment and contact will be published here also with your consent.

    Thank you for choosing researchwap.com.