CONSTRUCTION OF AN ADJUSTABLE ELECTRONIC FLASHER
ABSTRACT
This project (Construction of A adjustable electronic flasher) was constructed locally with the use of local materials and tools in the I.M.T mechanical Engineering workshop. The various parts of the equipment were constructed separately using mild steel before finally coupled. During the construction, the conveyors and their housing were first constructed. After the construction work, the test run was carried out using the grains of wet maize and dried maize. The result shows greater efficiency in home, office, and hotel use. CHAPTER ONEINTRODUCTION
Flashing circuits are very interesting. They grab your attention and can be used in many applications. They consume very little energy and a single cell can last as long as 12 months. You can flash globes, LEDs, and pulse all types of devices such as motors, solenoids, and piezo diaphragms. In this discussion, we will cover a number of interesting "oscillator circuits." They can be adapted for other applications - but to do this you have to know how they work. This is not easy as most of them are quite complex. In fact, oscillator circuits are one of the most difficult circuits to understand. But if you read the text, everything will become clear. Flasher circuits have developed over a long period of time, with many of the earlier designs proving to be unreliable.
OBJECTIVE OF THE STUDY
The objective of this research work is to construct an adjustable led flasher. The project is aimed to have a couple of advantages over a flashing LED that can be bought as an individual item. The project is also the objective of the researcher to design the project with the most economical and efficient parts so as to make it avoidable to everyone.
SCOPE OF THE STUDY
The scope of the operation of the adjustable electronic flasher fully automated. It pulses it with a higher peak current to give a brighter illumination and consumes less average current. This means it will work for a long time on an almost flat battery and cost nothing to run. It can be used for battery equipment to indicate the power is ON or as an ALARM ON indicator. You can use a super-bright LED and get a really bright flash, or an ordinary green, orange, or yellow LED to get something better than a flashing red LED.
LIMITATION OF THE STUDY
The following are the problem encountered during the research work.1. TIME: The research of adjustable electronic flasher is a time-consuming exercise for collection, analysis, and preparation of its report Goods research takes time to plan and execute.2. COST: It is very costly to plan and implement this assertion in view of the fact that make research requires the use of human resources, other resources, and considerable time for the execution.3. EXACTNESS: To ensure the behavior of human beings, it is impossible to predict such behavior with absolute exactness or accuracy.
.