DESIGN AND CONSTRUCTION OF A QUAD ROTOR CAPABLE OF LIFTING FROM THE FLOOR


Department Of Electrical And Electronics Engineering


PAGES: 56
FORMAT: MS WORD
Chapters: 1-5
PRICE: ₦ 5,000.00

DESIGN AND CONSTRUCTION OF A QUAD ROTOR CAPABLE OF LIFTING FROM THE FLOOR

CHAPTER ONE 1.0       INTRODUCTION An unmanned aerial vehicle  (UAV)  is an aircraft that does not carry a  human operator.  It  is normally a powered aircraft that relies on aerodynamic forces to provide motion. This motion is controlled either by onboard computer (autonomous) or by remote control. Accurate methods of detecting  and  reacting  to  the  UAVs  environment  are  being  developed;  making  some  modern UAVs are virtually crash-proof (Merz & Kendoul 2013). Quadrotors  are  symmetrical  vehicles  with  four  equally  sized  rotors  at  the  end  of  four  equal length rods. Early designs of quadrotors were completed in the 1920‟s by Etienne Omichen, Dr. George de Bothezat and Ivan Jerome. These designs, however, never truly grasped the attention of the public or the in case of Dr. Bothezat and Jerome the military.    Therefore,  neither Omichen’s or Bothezat and Jerome’s were mass-produced. This fact, however, does not discredit the advantages of quadrotors. Unlike their counterparts, quadrotors make use of multiple rotors allowing for a greater amount of thrust and consequently a  greater amount of maneuverability. Also, the quadrotors symmetrical design allows for easier control of the overall stability of the aircraft. Each of the rotors on the quad-rotor helicopter produces both thrust and torque. Given that the front and rear motors both rotate counter-clockwise and the other two rotate clockwise, the net aerodynamic torque will be zero, as seen in Figure 1.0                             Fig. 1.0: Torque Pattern and Related Motion The generalized coordinates for rotorcraft are: q=(x, y, z, θ, φ, ψ)                                                                                      (1.1) Where (x, y, z) denote the position of the center of mass of the rotorcraft relative to the frame, and (θ, φ, ψ) are the three Euler angles that represent the orientation of the craft in figure 1.2 As UAVs are becoming more advanced and more practical, with longer flight times and larger payloads, more tasks are being found that they can perform. From pleasure activities to advanced military versions, UAVs are finding a bigger role in the modern world (Merz & Kendoul 2013). There are two types of  UAVs,  rotary-wing, and fixed-wing.  Fixed-wing  UAVs  are Unmanned airplanes that use forward propulsion over a fixed airfoil to gain lift.  They  need  a  relatively high  forward  velocity  in order  to  produce  this  lift  and  so  are  not  suitable  for  operation  in confined or hazardous environments. Rotary-wing UAVS can further be divided into another 2 types,  single rotor, and multi-rotor.  Single rotor vehicles are helicopters.  They  generally  use  a single  large  diameter  rotor  to  generate  lift  and  require  a  tail  rotor  for  stability  and  direction control. Multi-rotor vehicles use multiple rotors to control all forms of motion (Kendoul 2012).  1.1      Aim of the Project The project involves the design of a quadrotor capable of lifting from the ground.  Along  with optimizing frame design and weight reduction, the control for the quadrotor was designed. With With the control on board, we were able to configure the flight controller of the quadrotor and allow the quadrotor to hover at a given altitude.                            Fig. 1.1: Body and Inertial Frame Coordinate Axis     1.2   Objective of the Project The major objective of this project is to design,  implement and test a stable flying  UAV.  The the plane is to choose an existing quadcopter kit, couple the kits, and configuring each of the kits on the choosing flight controller.

.



TYPE IN YOUR TOPIC OR KEYWORD AND CLICK SEARCH:

HOW TO GET THE COMPLETE PROJECT MATERIAL ON DESIGN AND CONSTRUCTION OF A QUAD ROTOR CAPABLE OF LIFTING FROM THE FLOOR

  • * Click the green DOWNLOAD Button above

    * Select any option to get the complete project material instantly.

    * Chat our 24/7 customer service desk on WhatsApp# (+234) 0803-766-4978 and get your complete project material instantly.

    * All project materials on this website are well researched by professionals with high level of professionalism.


TESTIMONIES FROM OUR CLIENTS

Please feel free to carefully review some written and captured responses from our satisfied clients.


  • Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.

    "Exceptionally outstanding. Highly recommend for all who wish to have effective and excellent project defence. Easily Accessable, Affordable, Effective and effective."


  • Hilary Yusuf, United States International University Africa, Nairobi, Kenya.

    "I saw this website on facebook page and I did not even bother since I was in a hurry to complete my project. But I am totally amazed that when I visited the website and saw the topic I was looking for and I decided to give a try and now I have received it within an hour after ordering the material. Am grateful guys!"


  • Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.

    "Researchwap.net is a website I recommend to all student and researchers within and outside the country. The web owners are doing great job and I appreciate them for that. Once again, thank you very much "researchwap.net" and God bless you and your business! ."


  • Lamilare Valentine, Kwame Nkrumah University, Kumasi, Ghana.

    "Great User Experience, Nice flows and Superb functionalities.The app is indeed a great tech innovation for greasing the wheels of final year, research and other pedagogical related project works. A trial would definitely convince you."


  • Sampson, University of Nigeria, Nsukka.

    "I love what you guys are doing, your material guided me well through my research. Thank you for helping me achieve academic success."


  • Cynthia, Akwa Ibom State University .

    "researchwap.com is God-sent! I got good grades in my seminar and project with the help of your service, thank you soooooo much."


  • Elizabeth, Obafemi Awolowo University

    "Sorry, it was in my spam folder all along, I should have looked it up properly first. Please keep up the good work, your team is quite commited. Am grateful...I will certainly refer my friends too."


  • Ali Olanrewaju, Lagos State University.

    "Am happy the defense went well, thanks to your articles. I may not be able to express how grateful I am for all your assistance, but on my honour, I owe you guys a good number of referrals. Thank you once again."


  • Willie Ekereobong, University of Port Harcourt.

    "My Dear Researchwap, initially I never believed one can actually do honest business transactions with Nigerians online until i stumbled into your website. You have broken a new legacy of record as far as am concerned. Keep up the good work!"


  • Theressa, Igbinedion University.

    "WOW, SO IT'S TRUE??!! I can't believe I got this quality work for just 5k...I thought it was scam ooo. I wouldn't mind if it goes for over 5k, its worth it. Thank you!"


  • Joseph, Abia state Polytechnic.

    "I did not see my project topic on your website so I decided to call your customer care number, the attention I got was epic! I got help from the beginning to the end of my project in just 3 days, they even taught me how to defend my project and I got a 'B' at the end. Thank you so much researchwap.com, infact, I owe my graduating well today to you guys...."


  • Christiana, Landmark University .

    "My friend told me about ResearchWap website, I doubted her until I saw her receive her full project in less than 15 miniutes, I tried mine too and got it same, right now, am telling everyone in my school about researchwap.com, no one has to suffer any more writing their project. Thank you for making life easy for me and my fellow students... Keep up the good work"


  • Musa, Federal University of Technology Minna

    "I wish I knew you guys when I wrote my first degree project, it took so much time and effort then. Now, with just a click of a button, I got my complete project in less than 15 minutes. You guys are too amazing!."


  • Ali Obafemi, Ibrahim Badamasi Babangida University, Niger State.

    "I was scared at first when I saw your website but I decided to risk my last 5k and surprisingly I got my complete project in my email box instantly. This is so nice!!!."


  • To contribute to our success story, send us a feedback or please kindly call 2348037664978.
    Then your comment and contact will be published here also with your consent.
    Thank you for choosing researchwap.com.

FREQUENTLY ASKED QUESTIONS

  • How can I get the complete project - DESIGN AND CONSTRUCTION OF A QUAD ROTOR CAPABLE OF LIFTING FROM THE FLOOR

    Simply click on the DOWNLOAD green button above and follow the procedure stated.


    Is it a complete project work or just materials?

    Yes, it's a Complete Research Project material. i.e Chapters 1-5, Abstract, Table of Contents, Full References, Questionnaires / Secondary Data


    What if I want to change the case study for DESIGN AND CONSTRUCTION OF A QUAD ROTOR CAPABLE OF LIFTING FROM THE FLOOR, What can i do?

    Chat with Our 24/7 Customer Service Desk Now: WhatsApp# and you will be responded to Instantly


    How long does it take to get the complete project on DESIGN AND CONSTRUCTION OF A QUAD ROTOR CAPABLE OF LIFTING FROM THE FLOOR?

    Depending on how fast your payment and details is acknowledged by us, you will get the complete project within 30 minutes. However, on a very good day you can still get it within 15 minutes!


    How will I get my complete project?

    The Complete Project Material will be Delivered via your Email Address in an MS Word document format


    Can I get my Complete Project through WhatsApp?

    Yes! We also send your Complete Research Project to your WhatsApp Number


    What if my Project Supervisor made some changes to a topic i picked from your website?

    Call or Chat With Our 24/7 Custumer Care Desk: +2348037664978 and you will be responded to Instantly


    Do you assist students with Assignment, Term Paper, Seminar and Project Proposal?

    Call or Chat With Our 24/7 Custumer Care Desk: +2348037664978 and you will be responded to Instantly


    What if i do not have any project topic idea yet?

    Don't Worry! We've Got Your Covered. Chat with us on WhatsApp# (+234) 0803-766-4978 to Get Instant Help.


    Why should I trust this website?

    We are well aware of fraudulent activities that have been happening on the internet. It is regrettable, but hopefully declining. However, we wish to reinstate to our esteemed clients that we are genuine and duly registered with the Corporate Affairs Commission as "TOPNOTCH INFOTECH ENTERPRISE". This site runs on Secure Sockets Layer (SSL), therefore all transactions on this site are HIGHLY secure and safe!


    I have a fresh topic that is not on your site. How do I go about it?

    Don't Worry, Chat with us on WhatsApp# (+234) 0803-766-4978 to Get Instant Help.



PROJECT DETAILS

PAGES: 56
FORMAT: MS WORD
Chapters: 1-5
PRICE: ₦ 5,000.00




TYPE TOPIC OR KEYWORD AND CLICK SEARCH: