PRODUCTION OF STARCH FROM CASSAVA (Manihot Esculenta) AND ITS CROSS LINKED DERIVATIVES


PRODUCTION OF STARCH FROM CASSAVA (Manihot Esculenta) AND ITS CROSS LINKED DERIVATIVES    

ABSTRACT

The study looked into the production of starch from cassava and formulation of its cross-linked derivatives, various tests were carried out in the starch produced such as ash content, moisture content, pH value, and gelatinization temperature of the native starch produce which is higher than the cross-linked derivatives. This is as a result of reduced cohesion, rubbery elastic characteristics of starch paste to a smooth salve like and creamy past of the cross-link starch.

TABLE OF CONTENT

CONTENT                                                                            

Title page                                                                       

Declaration                                                             

Certification                                                            

Dedication                                                              

Acknowledgment                                                    

Table of content                                                     

Abstract                                                                  

CHAPTER ONE: PRODUCTION OF STARCH FROM CASSAVA (Maihot Esculanta) AND ITS CROSS LINKED DERIVATIVES

INTRODUCTION                                                                           

LITERATURE REVIEW                                             

1.1              MEANING AND COMPOSITION OF STARCH                

1.2.1           COMPLEX BRANCH CHAIN (AMILOPECTIN)                

1.1.2           AMYLOSE CHAIN                                                      

1.1.3           STARCH GELATINIZATION                                              

1.1.4           GELATINIZATION PROCESS                                  

1.1.5           STARCH RETRO GRADATION                               

1.2.0           SOURCES OF STARCH                                           

1.2.1           CASSAVA STARCH (Manihot esculanta)               

1.2.2           ORIGIN, TYPES AND COMPOSITION OF             

CASSAVA STARCH                                                  

1.2.3           ADVANTAGES OF CASSAVA STARCH                          

TABLE 1.0 APPROXIMATE COMPOSITION OF THE                       

CASSAVA TUBER[10]                                              

Fig 2.0       TABLE                                                                         

1.3.0           TYPES OF STARCH                                                 

1.3.1           DEFINITION AND REASONS FOR STARCH                  

MODIFICATION                                                         

1.3.2                   STARCH MODIFICATION                                        

1.4.0                   CROSS – LINK STARCH                                          

1.4.1                   EFFECT OF CROSS-LINKING ON STARCH                  

1.4.2                   USES OF CROSS-LINKED STARCH                     

DERIVATIVES

TABLE  

1.4.3                   FUNCTIONS OF CROSS-LINKED

STARCH IN FOOD                                                    

1.5.0                   CARBOXY METHYL STARCH                                 

AIM AND OBJECTIVE                                                        

SIGNIFICANT OF THE STUDY                                

LIMITATIONS OF THE STUDY                                

CHAPTER TWO:

2.0             MATERIALS AND METHODS                                  

2.1.0                   RAW MATERIALS USED                                          

2.1.1                   EQUIPMENT USED                                                   

2.1.2                   REAGENT USED                                                       

2.2.0                   METHODS OF PRODUCTION OF                          

CASSAVA STARCH                                                  

2.2.1                   SORTIN/SELECTION                                                

2.2.2                   CLEANING/WASTING                                                        

2.2.3                   PEELING/GRINDING                                                

2.2.4                   SIEVING/FILTRATION                                                        

2.2.5                   DRYING/BLENDING                                                  

2.3             CASSAVA STARCH PRODUCTION                       

2.4.0                   PRODUCTION OF CROSS-LINKED                       

DERIVATIVES

3.0              ANALYTICAL DETERMINATION AND RESULT   

3.2.0           ANALYTICAL DETERMINATION OF MOISTURE

CONTENT OF THE PRODUCT                               

3.3.0           ANALYTICAL DETERMINATION OF PH OF THE

PRODUCT                                                                            

3.4.0           ANALYTICAL DETERMINATION OF

ASH CONTENT                                                          

3.5.0           ANALYTICAL DETERMINATION OF

GELATINIZATION                                                      

TEMPERATURE OF THE NATIVE STARCH                  

CHAPTER THREE: 

3.6              RESULTS                                                                   

CHAPTER FOUR:

CONCLUSION                                                                               

DISCUSSION                                                                                 

RECOMMENDATION                                                                   

REFERENCES                                                                              

CHAPTER ONE

1.0    INTRODUCTION

    Starch can be obtained from cassava, sorghum, maize, sago and potatoes. But this project focused on the production of starch from cassava. Starch can be cross-linked a product that will be suitable for noodle, salad cream custard making. Normally it is easier to make this product from corn and potatoe starch, but cassava which is readily available and cheap can be employed to meet the demand of the people.

    Other synthetic starch produced from cassava includes; carboxymethyl starch (which is produced when one of the hydrogen atom of the starch is replaced by carboxymethyl groups, starch acetate, starch xanthate and hydroxyl alkyl starch. These are used as thickening agents, sterbilizer and emulsifier in products. Cassava starch when treated with phosphate are used in frozen products when they are defrosted to prevent them from dripping. This study investigated the production of starch from cassava and preparation of cross-link derivatives.

LITERATURE REVIEW

1.1    MEANING AND COMPOSITION OF STARCH

    Starch is one of the most abundant substances in nature, a renewable and almost unlimited resource with a chemical formula (C6H10O5)n. It is a polysaccharide, a chain of many glucose molecules. It is the most carbohydrate stored in roots and seeds of plants.[1] There are two types of glucose chain in starch which are the amylose and amyloeptin.

1.2.1    COMPLEX BRANCH CHAIN (AMILOPECTIN)

    Amylopectins are made up of several million glucose units. It forms branched structures with about 30 glucose units in a chain between branches. This makes the molecule somewhat stripped in appearance with the knotted branch point in all rows and smooth chain separating them. These molecules are so large that this stripped appearance show up under a light microscope forming what appears to be ‘growth rings’ in the starch grain.[2]

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

Fig 1.0

α 1→4

α 1→4

α 1→4

α 1→4

α 1→4

α 1→6

α 1→4

α 1→4

α 1→4

α 1→4

α 1→4

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

1.1.2    AMYLOSE CHAIN

    Amylose chain tend to curl up into tielice (spirals) with the hydrophobic part inside. This allows them to trap oil and fat inside the helix as well as aroma molecules.[2]

Fig 2.0

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

OH

1.1.3    STARCH GELATINIZATION

WHAT IS GELATINIZATION?

This is a colloidal structure that is, it has interparticle bonds (usually hydrogen bonds) or lower potential energy than starch in true solution[3].

    Starch gelatinization is a process that breaks down the intermolecular bonds of starch molecules in the presence of water and heat, allowing the hydrogen bonding and oxygen sites (the hydroxyl) to engage more water. This irreversibly dissolves in starch granules. Penetration of water increases randomness in the general granule structure and decreases the number and size of crystalline regions [4]. Hence crystalline region do not allow water entry. Heat causes such region to be diffused so that the chain begin to separate into an amorphous form. This process is used in cooking to make roux sauce, pastery custard or popcorn.[5]

1.1.4    GELATINIZATION PROCESS

    Gelatinization is also known as the thickening of a liquid, the starch or flour granules absorb the liquid. When heated, the grains/granules swell and burst releasing the starch into liquid[6]

1.1.5    STARCH RETRO GRADATION

    This is a reaction that takes place in gelatinized starch when the amylose and amylopectin chain realign themselves causing the liquid to gelatinize.[3]

    When native starch is heated and dissolves in water, the crystalline structure of amylose and amylopectic molecules are lost and they hydrate to form a viscous solution. If the viscous solution is cooled at lower temperature for long enough period, the linear molecule amylose and the lower part of amylopectin molecule retrograde and rearrange themselves again to a more crystalline structure. Hence, retrogradation can expel water from the polymer network. This is a process known as SYNERESIS. A small amount of water can be seen on top of the gel. Retrogradation is directly related to stalling or aging  of bread [3]

1.2.0    SOURCES OF STARCH

Cassava starch

Maize starch

Sorghum starch

Sago starch

Potatoe starch

1.2.1    CASSAVA STARCH (Manihot esculanta)

    Cassava starch has many remarkable characteristics including high paste viscosity, high paste clarity and high freeze-thaw stability which are advantageous to many industries.

    Several workers have reported the production of starch and its cross linked derivation [7]. This report described the principle of using cassava starch to produce some vital products because cassava are readily available and cheap. Hence, they are available at low cost [8]. Over the years, the ability to produce some synthetic starch from cassava has been reported in literature and this includes crosslinked starch, carboxyl methyl starch, starch acetate, starch xanthate etc.

1.2.2    ORIGIN, TYPES AND COMPOSITION OF CASSAVA STARCH

Cassava is a staple crop that is particularly important in South America, America and African countries[9]. It is a perennial shrub that grows to approximately 2 meters tall and has the ability to grow on a  marginal land in low-nutrient soil where other crops do not grow well. It is also fairly drought tolerant. It is grown for its enlarged starch rich tuberous roots.

    Although cassava is a staple crop, it is poisonous in its raw state as the plant contains cyanogenic glucoside. These glucosides are converted to HCN by enzymes called Linamarase which is present in cassava and acts on the glucosides when the plant cell are ruptured during the consumption stage.

The amount of cyanide contained in cassava depends on the variety and stage of the cassava. There are two types of cassava [9].

Bitter cassava (Manihot utilissiana)

Sweet Cassava (Manihot patinate)

The bitter cassava has a higher level of cyanide than the sweet cassava. The poison tends to be more concentrated in the skin of the root and can be readily removed during processing resulting in a safe and versatile product.

1.2.3    ADVANTAGES OF CASSAVA STARCH

⦁    High level of purity

⦁    Excellent thickening characteristics

⦁    A neutral taste

⦁    Desirble textural characteristics

⦁    A relatively cheap source of raw material containing a high concentration of starch that can equal or surpass the properties offered by other starches.

Appropriate composition of the cassava tube [10]

TABLE 1.0    APPROXIMATE COMPOSITION OF THE CASSAVA TUBER

Starch

Protein         20 – 30%

2 – 3%

Water    95 – 80%

Fat    0.1%

Fibre    1.0%

Ash        1 – 1.5%

Nigeria is the world’s largest producer of cassava (F.A.O of the United Nations). However based on the statistics from F.A.O of the United Nation, Thiland is the largest exporting country of dried cassava with total of 77% of world export in 2005.

Fig 2.0    TABLE

COUNTRIES     TONNES OF CASSAVA GROWN

Africa    99.1million

Asia        51.5million

Latin America    32.2million

Caribbean        32.2million

1.3.0        TYPES OF STARCH

Native Starch

Synthetic/Modified Starch

1.3.1    DEFINITION AND REASONS FOR STARCH MODIFICATION

    This native starch that has been changed in its physical and chemical properties. This can be used for other industrial application through series of techniques, chemical, physical and enzymatic modification[11].

    Modification may involve altering the form of granules or changing the shape and amylopectin molecules. It is carried out on the native starch to confer it with properties needed for specific uses. Which are;

⦁    To modify looking characteristics (gelatinization).

⦁    To reduce reterogradation.

⦁    To reduce paste’s tendency to gelatinize. 

⦁    To improve adhesiveness between different surfaces, such as in paper application[5]

Some of these modified starches include;

⦁    Cross – link starch

⦁    Carbxymethyl starch

⦁    Starch acetate

⦁    Starch Xanthate

⦁    Hydroxyl alkyl starch.

1.3.2        STARCH MODIFICATION

    Starches can be modified in several ways to change their function as additives in products. They can be cross-linked, where the chain get stuck together into a mesh. They can be heated to break the long chains down into simpler molecules like dextrin , polydextrine , and malto-dextrin. These are  simply short starches [2].

    Among carbohydrate polymers, starch is currently enjoying increased attention owning to its usefulness in different food products. Starches from various plant sources such as cassava, wheat, maize, rice and potatoes have received extensive attention in relation to structural and physical and chemical properties [1].

Native starches is  a good texture stabilizer and regulator in food system [12], but limitations such as low shear resistance, thermal resistance, thermal decomposition and high tendency towards retrogradation limit to its use in some industrial food application. Starch modification which involves the alteration of the physical and chemical characteristics of the native starch to improve its functional characteristic, can be used to tailor starch to specific food application [11].Starch modification is generally achieved through DERIVATION such as etherification, esterification, cross-linking and grafting of starch; decomposition (acid or enzymatic hydrolysis and oxidation of starch) or physical treatment of starch)or physical treatment of starch using heat or moisture etc.

Chemical modification involves the introduction of functional group into the starch molecules, resulting in markedly altered physic-chemical properties. Such modification of native granular starch profoundly alters their gelatnization, pasting and retrogradation behavior [5].

1.4.0        CROSS – LINK STARCH

Cross – linking treatment is intended to add intra and inter molecular bonds at random locations in the starch granule [13] Starch pastes from cross – linked starches are less likely to break down with extended cooking times, increased acidity or severe shear [14]. Nutritional benefits of cross-linked starch as a new source dietary fiber have also been reported [4].

Cross-linking is generally performed by treatment of granular starch with multifunctional reagent (phosphate of glycerol) capable of forming either ether or ester intermolecular linkages between hydroxyl groups on starch, molecules [15]. Dual modification (a combination of substitution and cross-linking) has been demonstrated to provide stability against acid, thermal and mechanical degradation of starch and to delay retrogradation during storage. The most common method of modification is cross-linking. When your cross-link starch, a chemical bond takes place between the starch chains.

The multifunctional reagents used in the treatment of starch introduces intermolecular bridges or cross – linking between molecules; thereby markedly increasing the average molecular weight. Because starch contains many hydroxyl groups, some intra molecular reaction which does not increase the molecular weight also take place. Intra molecular reaction is not significant on the usual granular reaction because the close packing of starch molecules favours intermolecular cross-linking [8].

1.4.1        EFFECT OF CROSS-LINKING ON STARCH

At high cross-linking, granules no longer gelatinize in boiling water nor even under autoclave condition. This high cross-linked starch has been used as a dusting powder for sugeon’s gloves [12]. Cross –linking at low level will minimize or eliminate the rubber, cohesive, stringly nature of the aqueous dispersion at waxy corn, tapioca and potato starch.

Cross – linking and substituting groups (often ionic) in starch causes changes in the functional properties that are of considerable commercial important. Those starches are variously used for their stability under condition of high temperature [5].

1.4.2        USES OF CROSS-LINKED STARCH DERIVATIVES

INDUSTRIAL USES: It is used as a diluents and carrier in many toilet powder e.g; the so – called violet acid, boric acid or alum and dusting powder contain zinc oxide. It is used as a binding agent, it sometimes appear in grey pills or in phenolphthalein pills. In the manufacture of asprin tablets starch is used for a specific purpose. It is dried to a low moisture content as possible, mixed with the acetyl salicylic acid and other components and the mixture compressed into tablets. When the tablet is swallowed, the starch rapidly absorbs moisture and swells, thus setting up an internal stress which causes the tablet to disintegrate completely[16].

HORTICULTURAL USES

Starch or dextrin are sometimes used in the preparation of horticultural sprays containing a killing agent for pests or fungi together with substance to cause the solution to penetrate cracks or spread over the leaves which normally are not wetted.

In emulsions containing soap, the emulsifying agent also acts as a wetting agent and the sole function of the dextrin is that of an adhesive. Dextrin and starch as adhesive have now been largely superseded by those of synthetic resin [16].

EXPLOSIVE AND FUELS

It has been used as a crystallizing and binding agent in moulded black powder explosive. According to A Schring FF two kinds of nitro-starch explosive are used in America for one kind, nitro starch is mixed with sodium bicarbonate 1.0%.

This mixture has a high brisance and is readily denoted, making it suitable for chamber blasts and quarrying limestone or granite [16].

THE BUILDING INDUSTRY: A 6% suspension of starch in a 40% alkali carbonate solution has been claimed as a plastic agent for incorporation in finely divided cement materials. Cross-linked starch has been used quite widely as the cementing agent in a number of fabricated products in the building industry. A. E Staley manufacturing co. used oxidized starch gelatinized hyextrusion as the binding agent for asbestos, mica, limestone, clay etc. [16]

TABLE

1.4.3        FUNCTIONS OF CROSS-LINKED STARCH IN FOOD

Function                    Application

Adhesion         Breaded products

Clouding        Drink fruit juice

Howling aid    Baking powder

Anu – status    Bakery goods

Gelling    Puddings

Thickening    Pie filling, soaps

Emulsifier        Salad dressing                                 

1.5.0        CARBOXY METHYL STARCH

Starches can have a hydrogen replaced by something else, such as carboxy-methyl group, making carboxymethyl starch [15].

OH

C

OH

OH

OH

OH

OH

OH

OH

OH

Carboxymethyl starch

Adding the carboxymethl group makes the starch less prone to damage by heat and bacteria. Carboxymethyl starch is used as an additive in oil drilling mud, and is used in the go that makes ultra sound examination messy [4] Carboxymethyl is also called starch ether or misnamed starch glycolate due to a historical misunderstanding [4].

Carboxymethyl groups makes the starch more hydrophilic (water loving) and aid in cross – linking). This makes carboxy methyl starch useful in asprin and other tablets to make them disintegrate quickly. [13] Longer carbon chain can also be added, such as carboxyethyl groups, or carboxypropyl groups.

Adding building functional groups like carboxymethyl and carboxyethyl groups reduces the tendency of the starch to recrystallize. When the starch stays as gel, a product is softer and we say it is “Fresh”. When the starch regains its crystalline form, the product becomes firmer and we say it is “Stale”. The technical term for this is starch retrogradation.

AIM AND OBJECTIVE

This project is aimed at investigating the potentials of cassava starch as suitable for noodles, salad cream and custard making.

SIGNIFICANT OF THE STUDY

The significant of the study is that if cassava is a means of producing noodles, custard, and salad cream then it could replace the more expensive corn and potatoe starch

LIMITATIONS OF THE STUDY

In carrying out this project, some factors mutilated against it. Among these factors were insufficient laboratory equipment needed to carryout the experiment.

.


TYPE IN YOUR TOPIC AND CLICK SEARCH.






RESEARCHWAP.COM

Researchwap.com is an online repository for free project topics and research materials, articles and custom writing of research works. We’re an online resource centre that provides a vast database for students to access numerous research project topics and materials. Researchwap.com guides and assist Postgraduate, Undergraduate and Final Year Students with well researched and quality project topics, topic ideas, research guides and project materials. We’re reliable and trustworthy, and we really understand what is called “time factor”, that is why we’ve simplified the process so that students can get their research projects ready on time. Our platform provides more educational services, such as hiring a writer, research analysis, and software for computer science research and we also seriously adhere to a timely delivery.

TESTIMONIES FROM OUR CLIENTS


Please feel free to carefully review some written and captured responses from our satisfied clients.

  • "Exceptionally outstanding. Highly recommend for all who wish to have effective and excellent project defence. Easily Accessable, Affordable, Effective and effective."

    Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.
  • "I saw this website on facebook page and I did not even bother since I was in a hurry to complete my project. But I am totally amazed that when I visited the website and saw the topic I was looking for and I decided to give a try and now I have received it within an hour after ordering the material. Am grateful guys!"

    Hilary Yusuf, United States International University Africa, Nairobi, Kenya.
  • "Researchwap.com is a website I recommend to all student and researchers within and outside the country. The web owners are doing great job and I appreciate them for that. Once again, thank you very much "researchwap.com" and God bless you and your business! ."

    Debby Henry George, Massachusetts Institute of Technology (MIT), Cambridge, USA.
  • "I love what you guys are doing, your material guided me well through my research. Thank you for helping me achieve academic success."

    Sampson, University of Nigeria, Nsukka.
  • "researchwap.com is God-sent! I got good grades in my seminar and project with the help of your service, thank you soooooo much."

    Cynthia, Akwa Ibom State University .
  • "Great User Experience, Nice flows and Superb functionalities.The app is indeed a great tech innovation for greasing the wheels of final year, research and other pedagogical related project works. A trial would definitely convince you."

    Lamilare Valentine, Kwame Nkrumah University, Kumasi, Ghana.
  • "Sorry, it was in my spam folder all along, I should have looked it up properly first. Please keep up the good work, your team is quite commited. Am grateful...I will certainly refer my friends too."

    Elizabeth, Obafemi Awolowo University
  • "Am happy the defense went well, thanks to your articles. I may not be able to express how grateful I am for all your assistance, but on my honour, I owe you guys a good number of referrals. Thank you once again."

    Ali Olanrewaju, Lagos State University.
  • "My Dear Researchwap, initially I never believed one can actually do honest business transactions with Nigerians online until i stumbled into your website. You have broken a new legacy of record as far as am concerned. Keep up the good work!"

    Willie Ekereobong, University of Port Harcourt.
  • "WOW, SO IT'S TRUE??!! I can't believe I got this quality work for just 3k...I thought it was scam ooo. I wouldn't mind if it goes for over 5k, its worth it. Thank you!"

    Theressa, Igbinedion University.
  • "I did not see my project topic on your website so I decided to call your customer care number, the attention I got was epic! I got help from the beginning to the end of my project in just 3 days, they even taught me how to defend my project and I got a 'B' at the end. Thank you so much researchwap.com, infact, I owe my graduating well today to you guys...."

    Joseph, Abia state Polytechnic.
  • "My friend told me about ResearchWap website, I doubted her until I saw her receive her full project in less than 15 miniutes, I tried mine too and got it same, right now, am telling everyone in my school about researchwap.com, no one has to suffer any more writing their project. Thank you for making life easy for me and my fellow students... Keep up the good work"

    Christiana, Landmark University .
  • "I wish I knew you guys when I wrote my first degree project, it took so much time and effort then. Now, with just a click of a button, I got my complete project in less than 15 minutes. You guys are too amazing!."

    Musa, Federal University of Technology Minna
  • "I was scared at first when I saw your website but I decided to risk my last 3k and surprisingly I got my complete project in my email box instantly. This is so nice!!!."

    Ali Obafemi, Ibrahim Badamasi Babangida University, Niger State.
  • To contribute to our success story, send us a feedback or please kindly call 2348037664978.
    Then your comment and contact will be published here also with your consent.

    Thank you for choosing researchwap.com.